Configure MACos SABNzndb for newsgroups

In this tutorial, configure MACos SABNzndb for the newsgroups. We are going to configure SABnzbd to download from the newsgroups.

If you’ve opened SABnzbd via Safari.

By default, this is with the address “http:/ip address-local:8080”

If it’s the first time you’ve started it. Then you get an installation wizard.

To enter the basic data. Those needed to be able to download from the newsgroups.

sabznbd wizard

Select English.

And click Start Wizard.

The following information should be filled in:

NewsServer

Username

Password

This information can often be found in the first email from your Usenet provider. For a free Usenet provider see the Free Usenet page. But I recommend you take a paid Usenet provider. This is because the speed of a Free usenet provider is very slow. And retention is often also very low.

Turn on the SSL check mark. This ensures that your device’s connection to your Usenet provider is secure.

Click now. Click to test the connection.

Then click Next.

sabznbd wizard ready

Click now. Go to SABnzbd.

SABnzbd is now being restarted.

Extra SABnzbd failed downloads cleanup

sabnzbd-synolgy-set

Go to Set (top left).
We’re going to set this up.
So your hard drive doesn’t fill up.

With failed downloads.

We do this with a task. I do this once a week. You don’t want everything removed immediately either. So you can figure out what’s going wrong, if necessary.

You do this under Task Planner.

sabnzbd-synolgy task planner clean up

I chose Saturday. Because there’s almost no TV series coming out.

SABnzbd download fails from Newznab provider

If you turn this on then SABnzbd download another nzb file. For example, your desired movie or TV series. If it fails the first time. This work in combination with automatic download ing via, for example, CouchPotato or Sonarr.

This just works. If the following requirements are met, the following requirements will be met.

  1. You’re using an automatic download program. Like, for example. Sonarr, SickBeard,SickRage, Radarr or Couchpotato.
  2. The Newznab provider needs to support it.

You turn this on in SABnzbd under Settings. And then Special. Then you need to check the next check mark new_nzb_on_failure (off)

This was the MacOS SABNzndb configuration manual.

Sabnzbd MacOS manual

  1. Sabznbd tutorial
  2. SABnzbd install MacOS
  3. Configure SABnzbd MacOS
Share This

Leave a Reply