In this tutorial, install Transmission Debian. We are going to install the software torrent client Transmision on a computer with Debian. This is going to be done via the command line.
We are going to, download Tranmission. And then install it. We do this with the following.
apt-get install transmission-daemon
If transmission is installed. Then we must stop it. Otherwise, we cannot edit the settings. We do this with the command below.
sudo /etc/init.d/transmission-daemon stop
Now we are able to edit the settings of Tranmission.
sudo nano /var/lib/transmission-daemon/info/settings.json
Now you can adjust the settings to your own taste. I have used the settings below. When you copy the settings below. Then you should. The thickly printed text “password”. Customize. To your own desired password of course.
{
“alt-speed-down”: 50,
“alt-speed-enabled”: false,
“alt-speed-time-begin”: 540,
“alt-speed-time-day”: 127,
“alt-speed-time-enabled”: false,
“alt-speed-time-end”: 1020,
“alt-speed-up”: 50,
“bind-address-ipv4”: “0.0.0.0”,
“bind-address-ipv6”: “::1”,
“blocklist-enabled”: false,
“blocklist-url”: “http://iblocklist.commiecast.com/f/tagqfxtteucbuldhezkz/bt_level1.gz”,
“cache-size-mb”: 4,
“dht-enabled”: true,
“download-dir”: “/var/lib/transmission-daemon/downloads”,
“download-limit”: 100,
“download-limit-enabled”: 0,
“download-queue-enabled”: true,
“download-queue-size”: 5,
“encryption”: 2,
“idle-seeding-limit”: 30,
“idle-seeding-limit-enabled”: false,
“incomplete-dir”: “/home/downloads/incomplete”,
“incomplete-dir-enabled”: false,
“lpd-enabled”: true,
“max-peers-global”: 200,
“message-level”: 2,
“peer-congestion-algorithm”: “”,
“peer-limit-global”: 240,
“peer-limit-per-torrent”: 60,
“peer-port”: 51412,
“peer-port-random-high”: 65535,
“peer-port-random-low”: 49152,
“peer-port-random-on-start”: false,
“peer-socket-tos”: “default”,
“pex-enabled”: true,
“port-forwarding-enabled”: true,
“preallocation”: 1,
“prefetch-enabled”: 1,
“queue-stalled-enabled”: true,
“queue-stalled-minutes”: 30,
“ratio-limit”: 2,
“ratio-limit-enabled”: false,
“rename-partial-files”: true,
“rpc-authentication-required”: true,
“rpc-bind-address”: “0.0.0.0”,
“rpc-enabled”: true,
“rpc-password”: “WACHTWOORD”,
“rpc-port”: 9092,
“rpc-url”: “/transmission/”,
“rpc-username”: “transmission”,
“rpc-whitelist”: “127.0.0.1”,
“rpc-whitelist-enabled”: false,
“scrape-paused-torrents-enabled”: true,
“script-torrent-done-enabled”: false,
“script-torrent-done-filename”: “”,
“seed-queue-enabled”: false,
“seed-queue-size”: 10,
“speed-limit-down”: 100,
“speed-limit-down-enabled”: false,
“speed-limit-up”: 100,
“speed-limit-up-enabled”: false,
“start-added-torrents”: true,
“trash-original-torrent-files”: false,
“umask”: 18,
“upload-limit”: 100,
“upload-limit-enabled”: 0,
“upload-slots-per-torrent”: 14,
“utp-enabled”: true
}
Now you need to save the file with CTRL + X. And then press the y key to confirm .
Now you can start Transsmision again with.
/etc/init.d/transmission-daemon start
Now you can open Tranmission in your browser with http://ip-adress:9092.
Username = transmission and password what you just specified, in the file “settings.json”.
You are now done with the install Transmission Debian tutorial. You can now configure it.
Transmission Debian tutorial
Prowlarr is a powerful tool that, in combination with Sonarr, provides an optimized and automated…
Ngroups is a well-known name in the Usenet world and is often cited as a…
Giganews is one of the oldest and best-known Usenet providers in the world. The company…
Very occasionally, it's necessary to check files with Quicksfv. This happens when there are no…
The term "best newsreader" is often used, but rarely explained properly. Because what constitutes "the…
Usenet has been used for years to download files and follow newsgroups. While this used…
Deze website gebruikt cookies.