Install Transmission Qnap SSH

In this Transmission Qnap installation tutorial, we will show you how to install Transmission on a QNAP system.

Transmission on QNAP is a lightweight and easy-to-use torrent client that lets you easily download and manage torrents on your NAS. Its intuitive web interface allows you to access your downloads from anywhere as long as you’re connected to your network. Transmission supports features such as encrypted connections, magnet links, and automatic downloads, allowing you to manage your files securely and efficiently.

Enabling SSH on your QNAP system

Before installing Transmission, it is important to check if SSH is enabled on your QNAP system. SSH is required to perform the installation and configuration steps.

Open the web interface of your QNAP system by entering the IP address of the device in the address bar of your browser and press Enter. Then log in with your administrator credentials to access the settings.

Go to Network & File Service.

Then to Telnet /SSH.

Check Allow SSH connection here.

Download and Install Putty for SSH

If you don’t have PuTTY installed on your computer, now is the time to do so. PuTTY is a free tool that allows you to easily create an SSH connection to your QNAP system.

Visit the official PuTTY download page and choose the right version for your operating system. For Windows 10 or 11, it is recommended to download the 64-bit x86 version.

Download the installation file and follow the instructions in the setup to install PuTTY.

Once installed, PuTTY is ready to use and you can easily establish an SSH connection to your QNAP system.

Installing Sherpa for Transmission Qnap

If Sherpa is not yet installed, you will first need to do so using the PuTTY program.

Now that PuTTY is installed, you can create an SSH connection to your QNAP system. To do this, follow the steps below:

1. Open PuTTY on your computer.
2. In the Host Name (or IP address) field, enter the IP address of your QNAP system.
3. Click Open to start the connection.

Once the connection is established, you will be prompted to log in. Make sure you log in with your Administrator account. This is essential, as only an Administrator account has the necessary rights to make changes or install software on your QNAP system.

Now we will download and install Sherpa with the following command.

curl -skL https://tinyurl.com/get-sherpa > /share/Public/sherpa.qpkg;
sudo sh /share/Public/sherpa.qpkg;

If that doesn’t work, try the command below.

sudo sherpa

If that doesn’t work, try the command below.

sherpa

Install Transmission Qnap

Enter the following command to start the Transmission installation.

sherpa install transmission

Transmission can now be accessed via http://ip-address-qnap:9991

This was the tutorial to install Transmission Qnap.

Tutorial Transmission Qnap

1. Tutorial Transmission.
2. Install Qnap Transmission.